Polypropylene in the construction industry
Contents |
[edit] Introduction
Polypropylene (PP, also known as polypropene or polymerised propene) is a type of thermoplastic polymer resin that has similar qualities to polyethylene (PE) but is slightly harder and has better resistance to heat and organic solvents. After PE, polypropylene is the second-most widely produced commodity plastic with a global market (2013) of around 55 million tonnes.
A member of the polyolefin family of resins, PP can be injection moulded and extruded into many shapes and products such as cups, cutlery, containers, housewares and car parts e.g batteries. It is also spun into fibres for inclusion in industrial and domestic textiles, including for clothing.
As a plastic it is extremely versatile and found in common household items and used in both commercial and industrial applications.
[edit] Properties
- Lightweight, tough and flexible
- Heat resistant (high melting point (around 160°C) – used in microwaves, dishwashers, food containers
- Chemically inert
- Impact and freeze-resistant
- High shatter resistance
- Low moisture absorption
- Mould resistant
- Low density allows lower-weight mouldings to be made
- Resistant to fats and organic solvents
- Accepts colour and dye without degrading
- Reasonably inexpensive
- Does not contain BPA (bisphenol A - which some claim can leach into food products)
- Fatigue resistance – allows use as a plastic hinge
- It can float in water
[edit] Typical applications
It has a large number of end-use applications in the construction industry due to the wide range of grades available and the use of additives to modify properties:
- PP fibres are added to concrete to increase strength and reduce cracking and spalling
- Non-woven fabrics for ground stabilisation
- Roofing membranes (waterproofing top-layer in single-ply systems)
- Reinforcement in construction and road paving
- Electrical cable insulation (alternative to PVC)
- Piping systems
- Carpets, rugs and upholstery
- Medical and laboratory equipment
- Reusable containers
- Plastic machine parts
- Industrial rope and cordage
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The act of preservation may sometimes be futile.
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.